Synthesis and magnetic behaviour of Mn:ZnO nanocrystalline powders

This paper reports on the magnetic properties of Mn:ZnO nanoparticles. XRD profiles have shown that the undertaken materials are in wurtzite structures. The crystallite size of the sample has been examined using TEM for one sample. In order to verify the lattice site occupancy and also valence state of the manganese ion, EPR spectral measurements have also been carried out for these samples. The magnetic properties of the samples have been investigated on a Vibrating Sample Magnetometer (VSM).     

Effect of sintering temperature and the particle size on the structural and magnetic properties of nanocrystalline Li0.5Fe2.5O4

Sintering temperature and particle size dependent structural and magnetic properties of lithium ferrite (Li_0.5Fe_2.5O₄) were synthesized and sintered at four different temperatures ranging from 875 to 1475 K in the step of 200 K. The sample sintered at 875 K was also treated for four different sintering times ranging from 4 to 16 h. Samples sintered at 1475 K have the cubic spinel structure with a small amount of α-Fe₂O₃ (hematite) and γ-Fe₂O₃ (maghemite). The samples sintered at≤1275 K do not show hematite and maghemite phases and the crystals form the single phase spinel structure with the cation ordering on octahedral sites. Particle size of lithium ferrite is in the range of 13-45 nm, and is depend on the sintering temperature and sintering time. The saturation magnetization increased from 45 to 76 emu/g and coercivity decreases from 151 to 139 Oe with an increase in particle size. Magnetization temperature curve recorded in ZFC and FC modes in an external magnetic field of 100 Oe. Typical blocking effects are observed below about 244 K. The dielectric constant increases with an increase in sintering temperature and particle size.     

Rotation Structure in the Ultraviolet Bands of SnF

Rotation structure of (0,0) bands of the (C-X)_3/2 and (G-X)_3/2 systems of SnF molecule has been photographed in the third order of a 10.6 meter concave grating spectrograph. The rotation constants, as determined from the analysis, have been reported to be:-     

A Zinc(II) Photocage Based on a Decarboxylation Metal Ion Release Mechanism for Investigating Homeostasis and Biological Signaling

Metal ion signaling in biology has been studied extensively with ortho‐nitrobenzyl photocages; however, the low quantum yields and other optical properties are not ideal for these applications. We describe the synthesis and characterization of NTAdeCage, the first member in a new class of Zn²⁺ photocages that utilizes a light‐driven decarboxylation reaction in the metal ion release mechanism. NTAdeCage binds Zn²⁺ with sub‐pM affinity using a modified nitrilotriacetate chelator and exhibits an almost 6 order of magnitude decrease in metal binding affinity upon uncaging. In contrast to other metal ion photocages, NTAdeCage and the corresponding Zn²⁺ complex undergo efficient photolysis with quantum yields approaching 30 %. The ability of NTAdeCage to mediate the uptake of ⁶⁵Zn²⁺ by Xenopus laevis oocytes expressing hZIP4 demonstrates the viability of this photocaging strategy to execute biological assays.     

Integrated quality by design (QbD) and design of experiments (DoE) approach for UFLC determination of telaprevir in rat serum

An ultrafast liquid chromatographic bioanalytical method was developed and validated for the determination of telaprevir in Wistar albino rat serum. Principles of quality by design (QbD) were implemented for enhancing the bioanalytical liquid–liquid extraction of telaprevir from rat serum. A Box–Behnken design was utilized in the studies by selecting extraction time, centrifugation speed, and vortex time as the critical method variables for evaluating their effect on the critical analytical attribute, i.e., %recovery of telaprevir. Chromatographic separation was achieved within a run time of 10?min using a C-18 column and mobile phase comprising of methanol:borate buffer of pH 9 (90:10 v/v) flowing at 1.2?mL/min. Photodiode array detection was performed at 270?nm. Results of validation studies were satisfactory. The method was linear over a concentration of 25–10,000?ng/mL. Limit of detection for the developed method was 10?ng/mL. Further, design of experiments (DoE) used for inter-day accuracy and precision study suggested superior method reliability. This integrated QbD- and DoE-based approach ensured the development of a validated and reliable analytical method for optimum bioanalysis of telaprevir in biological matrix.     

Laser‐Induced Self‐Assembled Nanostructures on Electron‐Transparent Substrates

Currently, one of the challenges in high‐resolution transmission electron microscopy (TEM) studies of nanomaterials is to make contamination‐free materials in a simple and time‐efficient way. Here, a method is demonstrated that combines nanosecond‐pulsed laser dewetting of thin films with a film float‐off technique to realize nanostructures (NSs) on electron‐transparent substrates in a robust and rapid manner. NSs of metal (Ag) and bimetals (AgCo, AuCo) ranging from 20 to 150 nm are synthesized on thin carbon film deposited on mica substrates. The NS/carbon system is subsequently transferred onto TEM grids by a float‐off process resulting from debonding of the carbon from mica due to their contrasting hydrophobic nature. This process enables the fabrication of different NSs on flexible and electron‐transparent substrates.     

Incremental collapse of thick-walled circular cylinders under steady axial tension and torsion loads and cyclic transient heating

The accumulation of plastic strain over a number of cycles of heating and cooling of the outer surface of a loaded thick-walled circular cylinder is computed. Two types of loadings are considered, viz. pure axial torsion and a combination of torsion and tension. The cylinder material is taken to be isotropic and linear strain-hardening; its yield stress reduces with temperature and with the number of thermal cycles completed. This cyclic softening is shown to produce an incremental collapse or ratcheting behaviour in contrast to the alternating plasticity which occurs when the yield stress on first loading is maintained.     

Dispersion and reactivity of copper catalysts supported on Al2O3-ZrO2

A series of CuO/Al(2)O(3)-ZrO(2) catalysts with Cu loadings varying from 1.0 to 20 wt % were prepared and characterized by X-ray diffraction (XRD), temperature-programmed reduction (TPR), temperature-programmed desorption (TPD) of CO(2) and NH(3), electron spin resonance (ESR), and Brunauer-Emmett-Teller surface area measurements. The dispersion and metal area of copper were determined by the N(2)O decomposition method. XRD results suggest that the copper oxide is present in a highly dispersed amorphous state at copper loadings < 10 wt % and as a crystalline CuO phase at higher Cu loadings. ESR results suggest the presence of two types of copper species on the Al(2)O(3)-ZrO(2) support. TPR results suggest well-dispersed copper oxide species at low Cu loadings and crystalline copper oxide species at high Cu loadings. Well-dispersed copper oxide species were reduced more easily than large copper oxide species by H(2). The results of CO(2) TPD suggest that the basicity of the catalysts was found to increase with an increase of copper loading up to 5.0 wt % and decreases with a further increase of copper loading. The results of NH(3) TPD suggest that the acidity of the catalysts was found to decrease with an increase of copper loading up to 5.0 wt % and increases with a further increase of copper loading. The catalytic properties were evaluated for the vapor-phase dehydrogenation of cyclohexanol to cyclohexanone and correlated with the results of CO(2) TPD measurements and the dispersion of Cu on the Al(2)O(3)-ZrO(2) support.     

Doping effect of Mn on the magnetic behavior in Ni-Zn ferrite nanoparticles prepared by sol-gel auto-combustion

The ferrite samples of a chemical formula Ni_0.5−xMn_xZn_0.5Fe₂O₄ (where x=0.0, 0.1, 0.2, 0.3, 0.4, and 0.5) were synthesized by sol-gel auto-combustion method. The synthesized samples were annealed at 600 °C for 4 h. An analysis of X-ray diffraction patterns reveals the formation of single phase cubic spinel structure. The lattice parameter increases linearly with increase in Mn content x. An initial increase followed by a subsequent decrease in saturation magnetization with increase in Mn content is observed showing inverse trend of coercivity (H_c). Curie temperature decreases with increase in Mn content x. The initial permeability is observed to increase with increase in Mn content up to x=0.3 followed by a decrease, the maximum value being 362. Possible explanation for the observed structural, magnetic, and changes of permeability behavior with various Mn content are discussed.